If you need to install your prescription inserts yourself, follow the steps below to install them into your glasses:
Step 1: Remove the Plug from the nose bridge of the glasses
Locate the bulge on the nose bridge — this is the plug.
Insert your thumbnail into the gap between the plug and the nose bridge.
Gently pull outward to remove the plug.
Step 2: Install the Prescription Inserts
Take your prescription inserts. You will notice two small pins on the inserts.
Align the pins with the two holes on the nose bridge of the glasses.
Insert the pins into the holes.
Press gently but firmly until the inserts are securely in place.
Done! Your prescription inserts are now properly installed and ready to use.
Watch the video below to see how to install the inserts:
How to remove the inserts: