How to Attach and Remove Your Sunglasses Clip-On

This guide shows you how to easily attach and remove the sunglasses clip-on from your glasses.

Attach the Clip-On

1. Check the clip slot — There’s a small slot on the nose bridge of the sunglasses clip-on.

2. Align the frames — Position your glasses so the nose bridge aligns with the slot, keeping both frames parallel.

3. Press to attach — Use your thumb to press down firmly on the nose bridge until the clip-on locks securely in place.

Remove the Clip-On

1. Hold the frame — Hold your glasses firmly.

2. Create a gap — Gently pull the lens edge to make a small gap between the clip-on and the frame.

3. Unclip and lift — Tilt the lens outward, then pull the nose bridge clip outward to release.

4. Detach — Lift the clip-on away from your glasses.

You can also watch the video below for a quick demonstration.